Manuals / HP / Computer Equipment / Printer

HP 9500mfp manual SituationSolution

Models: 9500mfp

1 354

Download 354 pages 57.43 Kb

Page 318

http://www.hp.com/go/clj9500mfp

SituationSolution

Printing stops in the middle of the job.

•Check the control-panel display for an error message.

•If you are on a network, make sure that the computer is correctly configured and that no network problem exists (see your network administrator).

•Check the line voltage to make sure that it is steady and within the MFP specifications. Turn the MFP off and then back on.

•Check the time-out setting in your network program. You might need to increase it.

•If you are trying to copy a file to the MFP from the MS-DOS prompt, use the copy command COPY [filename] LPTn /B MFP port, such as LPT1 (where n is the port number).

Note

To send the page to the output bin, you might have to send a form-feed command from the computer.

The MFP printed on only one side of the media rather than on both sides.

Make sure that the option to print on both sides of the media (duplexing) is configured in the printer driver.

302 Chapter 9 – Problem solving

Rev. 1.0

Image 318

HP 9500mfp manual SituationSolution

Contents

User guide Page HP Color LaserJet 9500mfp Copyright and License Trademark CreditsPage Chapter MFP basics Contents Digital sending and e-mailEnww Printing Control panel menus Managing and maintaining Service and support Specifications and regulatory information Enww Contents MFP components MFP componentsRev Enww Control panel Features and buttons Function Interpreting control-panel lights To specify other numeric valuesLight State Indication Light State Indication Control-panel home screen To set device defaults at the control panel Setting the MFP defaultsSetting the MFP device defaults Setting the MFP defaultsLoading input trays To load media in tray Loading input traysRev To load tray 1 when the same paper is used for multiple jobs Rev Tray 2 and tray 3 hold up to 500 sheets of standard media Loading tray 2 and trayTo load detectable standard-size media in tray 2 and tray Pull the tray open until it stopsRev Enww To load undetectable standard-size media in tray TrayThat tray Set the Custom/Standard switch to Custom Guide until it gently touches the paperSIZE=*SIZE menu is displayed Rev To load custom media in tray 2 and tray Rev Enww Rev To load the 2,000-sheet side input tray tray Rev Than ANY Changing and setting the media size and type for a trayTo set or change media size for tray Press the Menu buttonTo set or change a custom size for tray 2 and tray To set or change a media type for any tray Touch Exit to exit the menuMFP basics Copying Copy-screen layout Features and buttons Function Copy-screen layoutMoves back one screen on the control-panel display Simplex/duplex, and staplingStarts copying the document Previous screenCopying instructions Copying instructionsCopying by using the default settings one-touch copying Setting is Letter or A4 only if no media size is detectedCopying by using user-defined settings To make color copies by using the default settingsSelect Portrait or Landscape Job ModeBasic tab What to select Select 1-sided or 2-sidedDescription of use Ordering Sheet CopyingSelect Collated or Uncollated Copying by using the ADF Copying from the scanner glassCopying books Select Book as the size Touch OKCreating a job to be copied later Color copies or black and white copiesAdjust the lightness/darkness Reduce or enlargeEnhance the document Background Removal SharpnessSetting copy defaults Copy setting DescriptionIndicates the sharpness of the image when it is copied Network or e-mail administrator for this information Touch Sending Touch E-MAILRev Sending documents ColorSending documents Changing the settings Scan Preferences Select Black and White or ColorSending a document to multiple recipients Using the auto-complete function Using the address book Using the address bookAdded to the local address book Creating a recipient list Faxing Country/region support Support Guide Connecting the fax to a phone line Verifying the fax operation Verifying the fax operationEstablishing the required fax settings Name is a legal requirementUsing the Fax Settings menu Utility to disable the LAN faxEstablishing the required fax settings Setting or verifying the date and time Setting or verifying the locationTo verify or change the date and time settings Setting or verifying the fax header To verify or change the locationTo verify or change the phone number and the company name Type a phone number and then touch OK Fax feature screen Fax feature screenConfiguration Utility Status message barSend a FAX under the list of help topics Sending faxesSending a fax by typing the number manually From memoryFax Sending faxesSending a fax by using speed dial Then deleted from memorySpeed-dial group, see To create a speed dial onpage Sending a fax by using phone book numbers Contact listRev Canceling a fax Canceling a faxCanceling the current fax transmission Press the Menu button Touch FAXTo create a speed dial Canceling all pending faxesSpeed dial Touch the FAX optionTouch Delete Touch YES Touch OK To delete a speed dialTouch the Edit tab Touch the Delete Speed Dial option Speed dialChanging the sharpness setting To change the sharpness settingChanging the background setting To change the background settingChanging the light/dark setting To change the light/dark settingReceiving faxes Establishing optional fax settings Options might not be available or configurableEstablishing optional fax settings Setting the modem volume To set the modem volumeUse the following procedure to set the modem volume To set the ringer volume Setting the ringer volumeSetting outgoing fax resolution Reduce the transmission timeTo set the outgoing fax resolution Setting dialing and detection options Setting dialing and detection optionsSetting a dialing prefix To set a dialing prefixSetting the redial-on-busy feature To set redial-on-busySetting the paper tray Setting the paper trayTo select the paper tray Setting the destination bin To set the destination binAre you using the phone cord that came with the MFP? Troubleshooting faxWhat type of phone line are you using? Setting the destination binAre you using a phone-line splitter? Are you using a surge-protection device?Roll-over lines Checking fax status Checking fax statusHP Digital Sending utility has either disabled Analog fax is installed and readyFax is installed and operational. However MFP fax feature or has enabled LAN fax. WhenFax is installed but the option Fax feature is not operatingProblem Cause Solution Fax feature is not operatingFormatter board is faulty ServiceDoes not appear General fax problems Problem Cause Recommended actionGraphics or Text and Graphics. See Fax settings do not seem to be available in HP Web Jetadmin Schedule printing of faxes does Middle of faxing ADF cover onReceiving fax problems Receiving fax problems Problem Cause Solution Schedule printing of faxes is set Faxes will not print until the lock is disabledWill be printed after the tray is refilled MFP is out of tonerSending fax problems Disable the detect dial-tone setting see Sending fax problemsMFP is receiving faxes but is Sent faxes are not arriving at the receiving fax machine 16-31 Call establishment errors Error codesValue Description Connection enablement failure errors 32-63 Transmit negotiation errors64-79 Data transmit errors 80-111 Transmit termination errorsValue Description 112-143 Receive negotiate errors 144-159 Receive data errors160-191 Receive termination errors 192-223 Undefined 224-255Fax specifications Fax product specificationsEnvironmental specifications Fax product specificationsRev Printing from tray 1 when the loaded paper is requested Customizing tray 1 operationCustomizing tray 1 operation Manually feeding paper from tray Using the job-storage features Using the job-storage featuresTo gain access to the job storage features For Windows all versionsPrivate jobs To print a private jobStored jobs To delete a private jobTo print a stored job To delete a stored jobQuickCopy jobs To print additional copies of a QuickCopy job To delete a QuickCopy jobProof and hold jobs OptionTo print a proof and hold job To delete a proof and hold jobEnww Printing Control panel menus 121To navigate through the control-panel menus Jobs for that user Retrieve job menuExplanation Retrieve job menuUser Name Information menu Features Installed mass storage devicesMFP Paper handling menu Paper handling menuValues Explanation Appear for tray 1 onlySubstitute the tray number for N Measure and set the X and Y dimensions This message appears when the custom switch isWhere you select millimeters or inches as the unit Media sizesConfigure device menu Configure device menuOriginals submenu MFP uses the media sensors to automatically Use this item to specify the media size of the originalDocument Describe the size of the original document. If media is notArea. The setting can impact output quality for media Mixed is set as the default. You can select from nineIf Heavy Paper is set to ON, the scanner will adjust Whose weight is more than 100 g/m² 26-lb bondOne side or both sides of the copy Copying submenuColor copies Not collatedUse this item to indicate the number of copies that are Produced when you press Start without selectingFactory default setting is Number of copiesValues vary Depending onThat is attached =minimum sharpness Use this item to specify the sharpness settingEnhancement submenu =maximum sharpnessSending submenu Mail submenu Image Use this item to test the configured gateways for correctFunctionality. If the configured gateways are functional Use this item to automatically search the network forPrinting submenu Number from 1 to 32,000. Use the numeric keypad to specifyDefault Paper Size Letter Media size using the ruler labels in the trays That is installedControl-panel settings Simplex of a sheet of paperRegular The internal Courier font that is available on This item also applies to A3- and 11 x 17 size mediaUse this item to select the version of Courier font to use HP LaserJet 4 Series printersSelect on to print the PS error page when PS errors occur Print quality submenu Media type that you want to use. For each of the following Adjustments ON. The default value of each item is OFF. The RestoreOptimize option resets all options to the factory default Position OFF. For more information about optimize valuesControls on the control-panel display System setup submenuFactory default setting is Control panel menus Hard diskDeleted from the queue Monochrome mode. Auto switches between modes based onMost cost-effective option for switching modes Connected to a networkUse this item to specify the behavior of the trays. Each Options opens its own submenuElectronic components turns off the display backlight Sleep mode. Sleep mode minimizes the amount of power thatMFP consumes when it is idle and reduces wear on the MFP ModeInterrupt Possible values are determined by which valid languages are Installed in the MFPIt receives specific software commands Appears on the control panelCONTINUE=OFF on the control-panel System setup menu Determine how the MFP reacts to errorsTo stop printing when the MFP is out of staples, set Auto Goes offline for 10 seconds before returning onlineRecovery usually ON. This is the default setting Use this item to determine how the MFP functions when a jamAuto The MFP automatically selects the best mode for jam Performance might increase with this settingAvailable values include all languages in the list, and all Supported languages appearAppears. Touch the language that you want Selecting high-quality media 159Using non-HP-brand media Selecting and using mediaOrdering supported media Setting media size and type Standard media size Custom media size Supported types of media Recycled High gloss images Color Tough paperSecond Recommended media Ordering recommended media165 HP Premium Cover Paper HP Color Laser PaperRecommended media Type Characteristics HP Color Laser Paper HP Soft Gloss Laser Paper167 LaserJet Paper 105 g/m2 28-lb bondHP Premium Choice Finish on both sides, 98 brightRecommended media Type Characteristics HP Premium Choice HP LaserJet PaperHP Office Recycled Paper Recommended media Type Characteristics HP Tough Paper HP Color LaserJetTransparencies Weight Finish Type Determining media typeDetermining weight Matte versus glossyDevice Tray or bin Capacity Media WeightSupported media sizes for input and output Up to 100 sheets Standard sizes 64 to 220 g/m2Media Weight Tray or bin CapacityTray or bin Capacity Media Custom sizes face up Up to Standard sizes for face-down binSheets Long edge between 210 mm and 470 mmSheets stacked up 177Finsiher To 50 sheet 8K, 16K Stapled Standard sizes for face-up binMm x 470 mm 12 inches x 18.5 inches Up to 2,000 sheets Standard sizes for face-down binInches x 8.25 inches maximum 179Media-related copy-quality and print-quality issues Issue Recommended actionSee Determining media type on 181 Few more pages in order to remove the excess toner Preprinted form melt under the temperature of the fuser Smeared toner183 Its maximum capacity Loading input trays onFan the media to separate the individual sheets 185 Selecting and using media Checking supplies levels Using the MFP control panelManaging supplies Managing suppliesOrdering supplies Ordering directly through the embedded Web serverPress the Status button Storing supplies Storing the print cartridgesStoring the image drums Storing the image transfer kitReplacing and recycling the supplies Print cartridgesPrint cartridge Part number Replacing the print cartridges Rev Enww Black C8560A Cyan C8561A Yellow C8562A Using the image drumsImage drum Part number C8563AReplacing the image drums Open the door completely Enww Rev Enww Image transfer kit Replacing the image transfer kit Open the upper door on the right side of the MFP Enww Rev Transfer belt are pushed into the MFP completely Stops completelySwing the green lever up. Close all of the doors SlotRev Enww Rev Remove the bottom roller Roller. Slide the blue cover to the rightRev Image cleaning kit Replacing the image cleaning kit Enww Rev Cleaner handle and the green lever are in the up position Close the front doorsReattach the finishing device Image fuser kit Replacing the image fuser kit Enww Rev Enww Cleaning procedures Cleaning the ADFTo clean the glass Open the ADF Locate the top and bottom ADF glass strips To clean the ADF delivery systemCleaning procedures Locate the white, vinyl ADF backingRev To clean the top ADF glass strip Close the ADF cover To clean the ADF rollers Rev Cleaning the post charger Rev Enww Cleaning the fuser input Enww Rev Relocating the MFP Relocating the MFPManaging and maintaining Clearing jams Clear up after a few pages are printedClearing jams Problem solving Jam clearing locationsJam in the automatic document feeder ADF cover Clearing jams from the input-tray areas Jam in trayLoad media in tray Jam in tray 2 or tray Enww Rev Jam in the 2,000-sheet side input tray tray Rev Enww Jam inside the upper right door Enww Rev Jam at the upper right door or the front doors Open the front doors Lower the green lever Problem solving Enww Rev Enww Clearing jams from the duplexer Jam inside the duplexerEnww Rev Clearing jams from the output areas Jam in the fuser area at the lower left doorRev Enww Jam in the top output bin Step Remove loose tonerJam in the stacker or stapler/stacker Carefully pull out any media from the flipper area Avoid touching the flipper area. It can be hotHandle Open doors. Push the finishing device back into place Jam in the 8-bin mailbox face-up bin Rev Jam in the multifunction finisher Rev Enww Rev Situation Solution Solving repeated jamsBe fed from tray Submenu on Using the MFP help systemUnderstanding MFP messages Understanding MFP messagesIf a message persists Solving output-quality problems Solving output-quality problemsOutput-quality problem Short edge Output-quality troubleshooting procedures Solving persistent output-quality problems Output-quality-defect chartHorizontal lines or streaks Vertical lines Repetitive defectsColor fade in all colors Color fade in one color Fingerprints and media dents Loose tonerSmeared toner White areas dropouts onMedia damage wrinkles, curl, creases, tears Specks or stray tonerSkewed, stretched, or off-center Misaligned colorsPrint Quality Troubleshooting Pages To print the Print Quality Troubleshooting Pages Solving MFP problems MFP hardware issuesSolving MFP problems Situation Solution Media-handling issues Situation Solution Occur Network documentation that came with your MFP network cardsSituation Solution Situation Solution Clipped margins MFP-output issuesPrinted with Make sure that no data extends into the unprintable areaSituationSolution Job prints with Job is not sent to the correct MFPBe printed facing down Print a PS or PCL font list see Information menu onSituationSolution Duplexer issues Situation Solution Extended warranty Warranty informationService during and after the warranty period Warranty informationColor print cartridge/image drum warranty Service and supportSpare parts and supplies availability Warranty information License Grant No Disassembly or DecryptionHP software license terms OwnershipExport Requirements TransferTermination Government Restricted RightsInformation from the MFP Information Specific to your products How to findCustomer support options worldwide About on the Basics tabCustomer support and MFP repair assistance World Wide Web MailCustomer support options worldwide Service and support Physical specifications Physical specificationsHP Color LaserJet 9500mfp Specifications and regulatory information Enww Power requirements and circuit capacity Volt modelsPower consumption Power consumptionRev Acoustical specifications¹ Acoustical specifications¹Sound power level Declared per ISO Sound pressure level bystander position Declared per ISORelative humidity Storage temperatureOperating and storage environment Storage humidityEnvironmental product stewardship program Protecting the environmentSupplies Returns HP LaserJet PrintingSupplies RecyclingRecycled paper Rev Material safety data SheetFCC statement Regulatory statements Declaration of ConformityConforms to the following Product Specifications Supplementary InformationEnww EU Statement for Telecom Operation Canadian DOC RegulationsVcci Statement Japan Korean EMI Statement Laser Statement for Finland Luokan 1 laserlaite Klass 1 Laser ApparatVaroitus VarningVaro Taiwan Class a Statement Taiwan Battery Statement Product Information Sheet Specifications and regulatory information Page C8549-90902