HP 2/8q Fibre Channel manual Zoning configuration to the fabric. This feature

Switch Manager

Table 37: Zoning dialog box messages (Continued)

Message	User action
No response from the switch.	Verify that the user has permissions to modify
or	the configuration on the switch, that the switch
Saving zoning data failed.	is reachable in the fabric, and that the fabric is
	reachable from the user’s workstation, and
	then refresh the zoning information from the
	switch to determine whether any of the zoning
	configuration has been applied. If necessary,
	re-edit the zoning configuration and apply to
	the switch again.
The maximum number of members has been	Remove unnecessary objects from the zoning
reached.	configuration and retry the operation.
or
The maximum number of members per zone
has been reached
The Orphan set is a place a holder for zones	Do not attempt to delete the orphan zone set.
that are not in a set. It can not be deleted.
The zone set you are attempting to activate	Not all switch vendors support port-based
contains port based zoning and there are	zoning. Consult the manual for these vendors’
switches in the fabric that might not support	switches to determine whether to apply this
this type of zoning. Some E_Ports may isolate.	zoning configuration to the fabric. This feature
Do you wish to continue?	is not supported by HP.
The zoning configuration has been changed.	The zoning configuration includes changes
Would you like to apply your changes?	that have not been applied to the switch. Click
	Yes to apply the changes to the switch before
	continuing, or click No to discard the changes
	and continue.
There is already a zone by that name in a	If the existing zone is the same as zone that the
different Zone set. Would you like to add that	user wants to add to this zoneset, continue.
zone to this Zone Set?	Otherwise, select a unique name for the new
	zone, and then retry the operation.
There is already a zone set with that name.	Select a unique name for the new object, and
or	then retry the operation.
There is already a zone with that name.
or
There is already a alias with that name.
This zoning configuration exceeds the limits for	Remove unnecessary objects from the zoning
this switch.	configuration, and then retry the operation.

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 107