Command Line Interface
Trap1Enabled | False |
Trap2Address | 0.0.0.0 |
Trap2Port | 162 |
Trap2Severity | warning |
Trap2Version | 2 |
Trap2Enabled | False |
Trap3Address | 0.0.0.0 |
Trap3Port | 162 |
Trap3Severity | warning |
Trap3Version | 2 |
Trap3Enabled | False |
Trap4Address | 0.0.0.0 |
Trap4Port | 162 |
Trap4Severity | warning |
Trap4Version | 2 |
Trap4Enabled | False |
Trap5Address | 0.0.0.0 |
Trap5Port | 162 |
Trap5Severity | warning |
Trap5Version | 2 |
Trap5Enabled | False |
ObjectID | 1.3.6.1.4.1.1663.1.1.1.1.31 |
AuthFailureTrap | True |
ProxyEnabled | True |
The following is an example of the Show Setup System command:
2/8q FC Switch #> show setup system
System Information |
|
| |
Eth0NetworkDiscovery | Static |
Eth0NetworkAddress | 10.20.11.32 |
Eth0NetworkMask | 255.255.252.0 |
Eth0GatewayAddress | 10.20.8.254 |
AdminTimeout | 30 |
LocalLogEnabled | True |
RemoteLogEnabled | False |
RemoteLogHostAddress | 10.0.0.254 |
NTPClientEnabled | False |
NTPServerAddress | 10.0.0.254 |