Command Line Interface

13. A message prompts you to reset the switch to activate the firmware.

Enter the hotreset command to perform a non-disruptive firmware activation.

2/8q FC Switch (admin) $>hotreset

Lip command

Reinitializes the specified loop port.

Authority

Admin

Syntax

LIP [PORT_NUMBER]

Keywords

[PORT_NUMBER]

The number of the port to be reinitialized.

Examples

2/8q FC Switch (admin) #> lip 2

Passwd command

Changes a user account’s password.

Authority

Admin account name and an admin session to change another account’s password; you can change you own password without an Admin session.

Syntax

PASSWD [ACCOUNT_NAME]

Keywords

[ACCOUNT_NAME]

The user account name. To change the password for an account name other than your own, you must open an admin session with the account name Admin. If you omit [account_name], you are prompted to change the password for the current account name.

Examples

2/8q FC Switch (admin) #> passwd user2

Press 'q' and the ENTER key to abort this command.

account

OLD

password

 

:

********

account

NEW

password

(4-20 chars)

:

********

please confirm account NEW password: ********

password has been changed.

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide

129