Switch Manager
Adding zone members
Adding a zone member to a zone affects every zone set in which that zone is a member. To add member ports/devices to a zone, do one of the following:
■Select a port by port number, Fibre Channel address, or World Wide Name in the Port/Device tree, and drag it into the zone. To select and drag multiple ports/devices, press and hold Ctrl while dragging.
■Select one or more ports by port number, Fibre Channel address, or World Wide Name in the Port/Device tree.
■Select Edit > Create Members. Choose the WWN, Domain/Port, or First Port Address option and enter the port hex value.
Click Apply to save changes to the zoning database.
Note: Domain ID conflicts can result in automatic reassignment of switch domain IDs. These reassignments are not reflected in zones that use domain ID/port number pair to define their membership. Be sure to reconfigure zones that are affected by a domain ID change.
Creating a member
The Create a Member dialog box allows you to add a member to a zone or alias that can not be added using the drag/drop method.
1.Select Zoning > Edit Zoning. The Edit Zoning dialog box is displayed (Figure 17).
2.Select the zone or alias in the left pane in which to add a member.
3.Select Edit > Create Members. The Create a Member dialog box is displayed.
4.Click WWN, Domain Port, or FC Address.
5.Enter the hexadecimal value for the new zone member. Enter 16 digits for a WWN member, 4 digits for a Domain Port member (DDPP), or 6 digits for an FC Address member (DDPPAA - D=Domain ID, P=PortNumber, A=ALPA).
6.Click OK.
Renaming a zone or a zone set
1.Select Zoning > Edit Zoning. The Edit Zoning dialog box is displayed (Figure 17).
2.Select the zone/zone set to be renamed in the Zone Sets tree.
3.Select Edit > Rename. The Rename Zone/Rename Zone Set dialog box is displayed.
4.Enter a new name for the zone/zone set.
5.Click OK.
Removing a zone member
Removing a zone member affects every zone and zone set in which that zone is a member.
1.Select Zoning > Edit Zoning. The Edit Zoning dialog box is displayed (Figure 17).
2.Select the zone member to be removed.
3.Select Edit > Remove.
4.Click OK.