HP 2/8q Fibre Channel manual Restore dialog boxes Full and Selective

Switch Manager

Figure 28: Restore dialog boxes – Full and Selective

3.Enter the archive file name or browse for the file. This archive file must be one that was produced by the Switch Manager Archive function. Configuration backup files created with the Config Backup CLI command are not compatible with the Switch Manager Restore function.

4.To restore all configuration settings, click the Full Restore tab, and then click Restore. To restore selected configuration settings, click the Selective Restore tab and check one or more of the following boxes, and then click Restore:

—Network Properties—Restores all settings presented in the Network Properties dialog box except the IP address. Refer to“Network properties” on page 72.

—IP Address—Restores switch IP address in addition to the other network properties.

—Switch Properties: Restores all settings presented in the Switch Properties dialog box except the domain ID. Refer to“Switch properties” on page 69.

—Domain ID—Restores switch domain ID in addition to the other switch properties.

—Port Properties—Restores all settings presented in the Port Properties dialog box. Refer to“Configuring ports” on page 85.

—Configured Zoning—Restores all zone sets, zones, and aliases in the switches zoning database.

5.If you select the Configured Zoning or Full Restore option and the file contains zone sets, a dialog box prompts you to activate one of those zone sets.

6.Click Yes.

7.Select a zone set from the drop-down list in the Select Zone Set to be Activated dialog box.

8.Click OK and view the results in the top pane of the Restore dialog box.

76 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide