HP 2/8q Fibre Channel manual Display filter

Command Line Interface

PORT—Monitors all port events.

SNMP—Monitors SNMP events.

SWITCH—Monitors switch management events.

ZONING—Monitors zoning conflict events.

ALL—Monitors all components.

NONE—Monitor none of the component events.

DISPLAY [filter]

Specifies the log events to automatically display on the screen according to the event severity levels given by [filter]. [filter] can be one of the following values:

CRITICAL—Critical severity level events. The critical level describes events that are generally disruptive to the administration or operation of the fabric, but require no action.

WARN—Warning severity level events. The warning level describes events that are generally not disruptive to the administration or operation of the fabric, but are more important than the informative level events.

INFO—Informative severity level events. The informative level describes routine events associated with a normal fabric.

NONE—Specifies no severity levels for display on the screen.

LEVEL [filter]

Specifies the severity level given by [filter] to use in monitoring and logging events for the specified components or ports. [filter] can be one of the following values:

CRITICAL—Monitors critical events. The critical level describes events that are generally disruptive to the administration or operation of the fabric, but require no action.

WARN—Monitors warning and critical events. The warning level describes events that are generally not disruptive to the administration or operation of the fabric, but are more important than the informative level events.

INFO—Monitors informative, warning, and critical events. The informative level describes routine events associated with a normal fabric. This is the default severity level.

NONE—Monitors none of the severity levels.

PORT [port_list]

Specifies one or more ports to monitor for events. Choose one of the following values:

[port_list]—Specifies port or ports to monitor. Use a <space> to delimit values in the list. Ports are numbered beginning with 0.

ALL—Specifies all ports.

NONE—Disables monitoring on all ports.

RESTORE

Restores and saves the port, component, and level settings to the default values.

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 145