Command Line Interface
Displays the options that are available for configuring event logging and automatic display to the screen. See the “Set Log Command” on page 144 for information about how to configure event logging and display level.
port
Displays the ports being monitored for events. If an event occurs which is of the defined level and on a defined component, but not on a defined port, no entry is made in the log.
settings
Displays the current filter settings for component, severity level, port, and display level. This command is equivalent to executing the following commands separately: Show Log Component, Show Log Level, and Show Log Port.
Examples
The following is an example of the Show Log Component command:
2/8q FC Switch #> show log component
Current settings for log
FilterComponent | NameServer MgmtServer Zoning Switch Blade Port Eport Snmp |
The following is an example of the Show Log Level command:
2/8q FC Switch #> show log level
Current settings for log
FilterLevel Info
DisplayLevel Critical
The following is an example of the Show Log Options command:
2/8q FC Switch #> show log options
Allowed options for log
FilterComponent All,None,NameServer,MgmtServer,Zoning,Switch,Blade,Port,Eport,Snmp
FilterLevel Critical,Warn,Info,None
DisplayLevel Critical,Warn,Info,None
The following is an example of the Show Log command:
2/8q FC Switch #> show log
[327][day month date time year][I][Eport Port:0/8][Eport State= E_A0_GET_DOMAIN_ID]
[328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0]
[329][day month date time year][I][Eport Port: 0/8][Sending init hello]
[330][day month date time year][I][Eport Port: 0/8][Processing EFP, oxid= 0x8]
[331][day month date time year][I][Eport Port: 0/8][Eport State = E_A2_IDLE]
[332][day month date time year][I][Eport Port: 0/8][EFP,WWN= 0x100000c0dd00b845, len= 0x30]