HP 2/8q Fibre Channel manual Port Properties dialog box messages

		Switch Manager
Port Properties dialog box messages
	Table 32: Port Properties dialog box messages
	Message	User action
	Invalid value entered for interop credits.	Verify that the data is valid, that the user has
	or	permissions to modify the configuration on the
	Failed to set I/O stream guard change.	switch, that the switch is reachable in the
	or	fabric, and that the fabric is reachable from
	Failed to set new interop credits.	the user’s workstation, and then retry the
	or	configuration change. Interop Credits is not
	Request to save and activate config failed.	supported at this time.
	or
	Received error in attempting to edit switch
	configuration.
	or
	Received error in attempting to save switch
	configuration.
	or
	Received error in attempting to activate switch
	configuration.
	Received error in attempting to release admin	The application did not receive a required
	privileges.	response from the switch. This may be caused
		by a momentary or extended loss of
		communications with the fabric.
		First refresh the information in the display to
		determine whether the changes took effect. If
		not, retry the changes.
		If the error persists, determine whether
		communications with the switch have stopped,
		and resolve any network problems. When
		communication with the fabric has resumed,
		return to the application to view the properties
		for the port and verify whether the changes
		took effect. If not, retry the changes.
	Request to save and activate config failed.	Verify that the data is valid, that the user has
		permissions to modify the configuration on the
		switch, that the switch is reachable in the
		fabric, and that the fabric is reachable from
		the user’s workstation, and then retry the
		configuration change.

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide 101