Ayre Acoustics TK-7150, TK-8150 specifications Break-In, Batteries, Disc Player Configuration

Batteries

The remote handset uses 4 x AAA batteries. These are accessed by removing the two screws that hold the black end piece. The battery holder will slide out, and the batteries may be replaced.

Disc Player Configuration

As shipped from the factory, the remote control handset is configured to operate the Ayre C-5xeMPdisc player. The button with three horizontal lines operates the “Audio” function that selects between various soundtracks on a DVD disc. Please refer the C-5xeMPowner’s manual for additional details.

The remote handset may also be easily configured to operate either the Ayre CX-7eMPCD player or the Ayre DX-5 Universal A/V Engine, which use different command sets. Please refer to the chapter “Optimization and Customization” for details.

Break-In

100 to 500 hours of music played through the system will ensure full break-in.

Due to the manufacturing processes used for the wires , capacitors, and circuit board materials, a break-in period is necessary for the preamplifier to reach its full sonic potential.

Each input uses a different physical path on the input circuit board. Therefore a separate break-in period is required for each input.

16