Refer to your notes describing which source components are connected to which numbered input.
Use the left-hand knob to scroll to the desired numbered input (”Set1 Unused” through “Set8 Unused”).
Press the right-hand button to navigate to the next menu level. The front panel will display “Name Unused”.
Use the right-hand knob to scroll through the list of available names (shown at the left). Selecting “Unused” disables that input, while selecting any other name from the list will activate that input. Select a name that describes the component connected to the chosen input.
When the desired name has been selected, press the left-hand button to navigate to the previous menu level. The front panel will show that the selected name has been assigned to the chosen input.
