Ayre Acoustics TK-8150, TK-7150 specifications Customization, Optimization and, Setup Mode

Optimization and

Customization

In most audio systems, the KX-R preamplifier only requires that the desired inputs be activated by naming them. This allows for easy operation of the audio system. Each source component is clearly identified and only the connected inputs are displayed in the list of available source components. However in certain installations it may be desirable to customize additional settings for each input.

Setup Mode

The setup mode allows the following settings to be independently adjusted for each input:

•Name - for easy identification of source components

•Gain Offset - for level matching of source components

•Balance - for channel matching of source components

•Bypass - for integration with a surround-sound processor

•AyreLink - for automatic input selection of linked components

To enter the setup mode, make sure that the preamplifier is in the standby state. Then press and hold the right-hand button

Setup Mode for five seconds. The front panel will then briefly display “Setup

Mode” and then enter the setup mode.

17