select the correct input. Similarly, it is possible that the user wishes to create a custom name for the CD player input, for example, “Music”. In this case there is no default AyreLink code that would select this input.
To address these issues, the setup menu allows each named input to be associated with an AyreLink identification code. Once you have selected the “AyreLink” menu item with the left-hand knob, simply select the desired identification code (“A” to “Z”, or “None”) with the right-hand knob.
Do not assign any single identification code to more than one input. Improper operation may result.
The identification code transmitted by an AyreLink source component will be found in the owner’s manual for that unit.
Reset
It is possible to reset all of the setup mode configuration items to their factory defaults by using the reset function. After entering the setup mode, turn the left-hand knob past “Set8 (input name)” to “Reset”. Press the right-hand button to enter the next menu level. The front panel will display “Reset?”, and turning the right-hand knob will select either “Yes” or “No”. Press the right-hand button again to confirm the selection. If “No” is selected, the front panel will display “Cancelled” and return to the previous menu level. If “Yes” is selected, the front panel will display “Resetting” momentarily. All inputs will revert to “Unused”, all offsets and balance adjustments will be restored to zero, all gain settings will be restored to “Normal”, and all AyreLink codes will default to “None”. The unit will then automatically enter the setup mode so that the desired inputs may be activated.
