Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
[no] interface <interface name>
interface name | String (up to 32 characters) |
Example:
Done!
If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
ip access-default-action
User level: read-write, admin.
•You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if necessary.
Use the ip
The syntax for this command is:
ip
integer (100...199) |
Example:
ip access-group
User level: read-write, admin.
•You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode.
Avaya P460 Reference Guide | 31 |
