Chapter 2 Avaya P460 CLI Commands

Example:

Router-1 (configure router:ospf) # redistribute static

redistribute (RIP)

User level: read-write, admin.

You can only access this command in router-RIP mode.

Type router rip at the command prompt to enter router-RIP mode if necessary.

Use the redistribute command to redistribute routing information from other protocols into RIP.

Use the no redistribute command to disable redistribution by RIP.

The default is disabled.

The syntax for this command is:

[no] redistribute <protocol>

protocol

Either Static or OSPF

Example:

Router-1 (configure router:rip) # redistribute ospf

Done!

reset

User level: read-only, read-write, admin.

Use the reset command to restart the system or an individual Supervisor module. The syntax for this command is:

reset [chassis spvs 1 2]

chassis

• Reset the entire chassis, including the Supervisor and I/O

 

Modules

 

• Reset the hardware

 

• Causes disruption to traffic of 10 to 20 seconds

spvs

• Reset both the Supervisor modules

 

• Minimal disruption to the traffic

1

Reset Supervisor module in slot 1

64

Avaya P460 Reference Guide

Page 74
Image 74
Cambridge SoundWorks P460 manual Redistribute RIP, Reset