SGE2010/SGE2010P Administ ration Guide 47
Port Configuration
Using the Console
To configure the ports:
1. Select Edit.
2. Proceed as needed:
a. Press the down arrow key to sc roll down through the lis t of ports.
b. Press the right arrow key to move the cursor from one field to the next within a row.
c. To change a setting, move the cursor to the field, and then press the Space Bar until the
desired setting appears.
3. Press the Esc key to move the cursor to the Action list.
4. Select Save to save your settings
5. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
PoE Settings
You can use the PoE Settings screen to specify the priority and PoE settings for each por t. You
can use the up or down arrow keys to scroll through all the por ts on the Ethernet switch.
To open this screen:
1. From the Switch Main Menu, press 3. Port Configuration.
2. From the Port Status Menu, press 2. Poe Settings.
Field Settings
Enable Enable or Disable
Auto Neg. On or Off
Spd/Dpx Auto, 10H, 100H, 10F, 100F, 1000F
Flow Ctrl Auto, On or Off