SGE2010/SGE2010P Administ ration Guide 17
System Configuration
Using the Console
Serial Port Configuration
Use the Serial Port Configuration screen to view or change the baud rate of the Ethernet switch.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.
3. From the Management Settings Menu, choose 1. Serial Port Configuration.
To change the baud rate of the serial port:
1. Select Edit, and then make changes.
2. Press the Esc key to move the cursor to the Action list.
3. Select Save to save your changes.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
Tel net Co nf igu ra ti on
Use the Telnet Configuration screen to view or change the time-out settings.