Using the Console
System Configuration
HTTP Configuration
You can use the HTTP screen to view and edit the HTTP settings.You can enable or disable the HTTP server and configure the port on which the session is enabled.
To open the screen:
1.From the Switch Main Menu, select 1. System Configuration.
2.From the System Configuration Menu, select 6. IP Configuration.
3.From the IP Configuration menu, select 3. HTTP Configuration.
To change the HTTP settings:
1.Select Edit, and then make your changes.
2.Press the Esc key to move the cursor to the Action list.
3.Select Save to save your changes.
4.When the Operation complete message appears, press the Esc key to move the cursor to the Action list.
HTTPS Configuration
Use the HTTPS Configuration screen to configure HTTPS settings. You can enable or disable the HTTPS server and configure the port on which the session is enabled.
SGE2010/SGE2010P Administration Guide | 34 |
