Linksys SGE2010, SGE2010P - page 33

SGE2010/SGE2010P Administ ration Guide 30

System Configuration

Using the Console

3. Select Save to save your settings

4. When the Operation complete message appears, press the Esc key to move the cursor to the

Action list.

5. When you are finished working on this screen, select Quit.

IPv6 Address Settings

You can use the IPv6 Address - Configuration screen to edit the IPv6 address settings.

To open this screen:

1. From the Switch Main Menu, select 1. System Configuration.

2. From the System Configuration Menu, select 6. IP Configuration.

3. From the IP Configuration menu, select 2. IPv6 Address Configuration.

4. From the IPv6 Address Configuration menu, select 2. IPv6 Address Settings.

To edit the IPv6 address settings:

1. Select Edit., and then make the changes. Press the Tab key to move the cursor from one

field to the next.

NOTE: To enable or disable the DHCP client, move the cursor to the field, and then press the

Space Bar to toggle between ENABLE and DISABLE.

2. Press the Esc key to move the cursor to the Action list.

3. Select Save to save your settings

4. When the Operation complete message appears, press the Esc key to move the cursor to the

Action list.

Contents

Main Table of Contents 1 2 3 4 Page Introduction Introduction Whats in this User Guide? Getting to Know the SGE2010/SGE2010P Getting to Know the SGE2010/SGE2010P SGE2010/P Front Panel Getting to Know the SGE2010/SGE2010P Feature Description SGE2010/P Back Panel Feature Description Connecting Devices to the SGE2010/ SGE2010P Sample Network Configuration Maximum Cabling Distances Before You Install the Switch... Placement Options Desktop Placement Rack-Mount Placement Connecting Devices to the SGE2010/SGE2010P Wall-Mount Placement Connecting the Cables Page Using the Console Connecting to Your Switch with HyperTerminal Page Page Connecting to the Switch with Telnet Logging On to the Console Selecting Menu Options and Actions Using the Switch Main Menu System Configuration System Inform ation Versi ons General Information Management Settings Serial Port Configuration Tel net Co nf igu ra ti on SSH Configuration Page Page Username & Password Settings Security Settings SSL Generate Certificate Show Certificate Disable Active Management Access Profile VLAN Management Default VLAN Setup IP Configuration IPv4 Address Configuration IPv6 Address Configuration Page Page Page Page Page HTTP Configuration HTTPS Configuration Network Configuration Page Page Page Page File Management Upgrade / Backup IPv4 Upgrade / Backup IPv6 Active Image Restore System Default Settings Reset to Factory Settin gs Reboot System Stack Configuration Port S tatus Port Sta tus PoE Status Port Configuration Port Settings PoE Settings System Mode (Layer 2 / Layer 3) Selection Help Page Web Utility Configuration Web Utility Configuration Connecting to the Switch with the Web-Based Utility Using Menus in the Web-Based Utility Page A Contacts US/Canada Contacts EU Contacts B Customer Site Survey Site Business Address Shipping Address (if different from above) Site Contact Security/Safety Procedures Site Coordinator Network/Bandwidth C Warranty Information Limited Warranty Exclusions and Limitations Obtaining Warranty Service Technical Support D Federal Communication Commission Interference Statement Industry Canada Statement EC Declaration of Conformity (Europe) E Specifications