SGE2010/SGE2010P Administ ration Guide 4
Sample Network Configuration
Connecting Devices to the SGE2010/SGE2010P
3
Connecting Devices to the SGE2010/SGE2010P
This chapter explains how to physically connect your n etwork devices to the switch.
•”Sample Network Configuration,” on page 4
•”Maximum Cabling Distances,” on page 4
•”Before You Install the Switch... ,” on page 5
•”Placement Options,” on page 5
•”Connecting the Cables,” on page 7

Sample Network Configuration

For an example of a possible network configuration, see the application diagrams s hown
below.

Maximum Cabling Distances

When you connect your network devices, make sure you don’t exceed the maximum cabling
distances, which are listed in the following table:
*A hub refers to any type of 100Mbps hub, including regular hubs and stackable hubs. A
10Mbps hub connected to another 10Mbps hub can span up to 100 meters (328 feet).
From To Maximum Distance
Switch Switch or Hub* 100 meters (328 feet)
Hub Hub 5 meters (16.4 feet)
Switch or Hub Computer 100 meters (328 feet)