Using Menus in the Web-Based Utility | Linksys SGE2010P guide

5	Web Utility Configuration
	Connecting to the Switch with the Web-Based Utility

Web Utility Configuration

This chapter provides an introduction to the features of the web-based configuration utility.

Linksys switch provides a complete web-based utility to configure the switch. This utility is accessed through your web browser.

•”Connecting to the Switch with the Web-Based Utility ,” on page 51

•”Using Menus in the Web-Based Utility,” on page 51

•”Viewing On-line Help ,” on page 52

Connecting to the Switch with the Web-Based Utility

You can connect to the switch using a standard web browser on a computer that is connected to the same network as the switch.

To access the web-based utility, enter the IP address of the switch to the address field of your web browser. The default IP address is 192.168.1.254.

Using Menus in the Web-Based Utility

Use the left navigation panel to choose options in the web-based utility.

SGE2010/SGE2010P Administration Guide

51

Image 54

Linksys SGE2010P manual Connecting to the Switch with the Web-Based Utility, Using Menus in the Web-Based Utility

Contents

Port 10/100/1000 Ethernet Switch Table of Contents Contacts Introduction What’s in this User Guide? Getting to Know the SGE2010/SGE2010P SGE2010/P Front Panel Getting to Know the SGE2010/SGE2010P SGE2010/P Back Panel Sample Network Configuration Maximum Cabling Distances Before You Install the Switch Placement OptionsDesktop Placement Rack-Mount Placement Connecting the Cables Wall-Mount Placement Connecting Devices to the SGE2010/SGE2010P Using the Console Connecting to Your Switch with HyperTerminal Using the Console Set the serial port settings as follows Connecting to the Switch with Telnet Logging On to the ConsoleSelecting Menu Options and Actions Using the Switch Main Menu System Configuration System Information To open this screenTo open this menu Versions General Information Management Settings To change the system contact, system name, and location Serial Port Configuration Telnet ConfigurationTo change the baud rate of the serial port SSH Configuration To change the time-out setting SSH Server Configuration To change SSH Server settings To change SSH Crypto Key Generation settings Username & Password Settings To generate the crypto key Security Settings To change User & Password settings SSL Generate Certificate To edit and execute a certificate Disable Active Management Access Profile To disable the active management access profileShow Certificate Default Vlan Setup Vlan Management IP Configuration To edit the Vlan ID IPv4 Address Configuration IPv6 Address Configuration To edit the IPv4 address settingsTo renew Dhcp To edit the IPv6 interface settings To edit the IPv6 address settings IPv6 Address Table To edit the Isatap tunnel settings IPv6 Default Gateway To edit the IPv6 default gateway settings To change the Http settings Http ConfigurationHttps Configuration To open the screen Network Configuration To change Https settings To change the IP address To begin the ping test Ping IPv6 To begin the trace route test TraceRoute IPv6 Upgrade / Backup IPv4 File Management To enter the IPv6 Upgrade/Backup file name and location Upgrade / Backup IPv6To enter the IPv4 Upgrade/Backup file name and location To download a file from the specified location To enter the active image settings Active Image Reboot System Restore System Default SettingsReset to Factory Settings To restore system default settings Stack Configuration Port Status Port Status PoE Status Port Configuration Port Settings PoE Settings To configure the ports System Mode Layer 2 / Layer 3 Selection To configure the PoE settings To edit the system mode or stacking mode Help Logout Connecting to the Switch with the Web-Based Utility Using Menus in the Web-Based Utility Viewing On-line Help US/Canada Contacts EU Contacts Customer Site Survey Yes Limited Warranty Exclusions and Limitations Obtaining Warranty Service Technical Support Obtaining Warranty Service Industry Canada Statement EC Declaration of Conformity Europe Specifications Radius Vlan EMC 080312A-LB