Trane PKGP-PRC003-EN manual Features and Benefits, High Pressure Cutout

Features and Benefits

High Pressure Cutout

This factory-installed option is offered for units that do not have High Pressure Cutout as standard. All 3-phase units with scroll compressors include High Pressure cutout as standard.

High Static Drive Accessory Available on many models, this high static drive accessory extends the capability of the standard motor. Avoid expensive motors and operating costs by installing this optimized sheave accessory.

Hinged Access Doors

These doors permit easy access to the filter, fan/heat, and compressor/control sections. They

reduce the potential roof damage from screws or sharp access door corners.

LonTalk®

Communications

Interface

The LonTalk communications interface allows the unit to

communicate as aTracer™LCI-V device or directly with generic LonTalk Network Building Automation System Controls.

Phase Monitor

Phase monitor shall provide 100% protection for motors and compressors against problems caused by phase loss, phase imbalance, and phase reversal. Phase monitor is equipped with an LED that provides an ON or FAULT indicator.

Power Exhaust Option

This option is available to maintain proper building pressurization. Great for relieving most building overpressurization problems.

Quick-Access Panels

Remove two screws for access to the standardized internal components and wiring.

Quick-Adjust Idler Arm

With the Quick-Adjust Idler Arm, the belt and sheaves can be quickly adjusted without moving the mounted fan motor. The result is a major savings in time and money.

Reference or Comparative Enthalpy Measures and communicates humidity while maximizing comfort control.

Sloped Drain Pans

Every Precedent unit has a non- corrosive, removable, double-sloped drain pan that’s

easy to clean and reversible to allo w installation of drain trap on either side of the unit.

Standardized Components Components are placed in the same location on all Precedent units. Familiarize yourself with one Precedent and you are familiar with every Precedent.

Due to standardized components throughout the Precedent line, contractors/owners can stock fewer parts.

Supply and/or Return Air Smoke Detector

With this option installed, if smoke is detected, all unit operation will be shut down. Reset will be manual at the unit. Return Air Smoke Detectors require minimum allowable airflow when used with certain models.

Tool-less Hail Guards

Tool-less, hail protection quality coil guards shall be either factory or field- installed for condenser coil protection. This option protects the condenser coil from vandalism and/or hail damage.

Trane Communication Interface (TCI) Available factory or field installed.This module when applied with the ReliaTel™ easily interfaces withTrane’s Integrated ComfortTM System.

PKGP-PRC003-EN 7