ZyXEL Communications HS100/HS100W Chapter Remote Management Screens, Remote Management Overview

HomeSafe User’s Guide

Chapter 14

Remote Management Screens

This chapter provides information on the Remote Management screens.

14.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which HomeSafe interface (if any) from which computers.

)When you configure remote management to allow

management from the WAN, you still need to configure a firewall rule to allow access. See the firewall chapters for details on configuring firewall rules.

You may manage your HomeSafe from a remote location via:

¾	Internet (WAN	¾	ALL (LAN and WAN)
	only)
¾	LAN only,	¾	Neither (Disable).

)When you Choose WAN only or ALL (LAN & WAN), you still need to configure a firewall rule to allow access.

To disable remote management of a service, select Disable in the corresponding Server Access field.

You may only have one remote management session running at a time. The HomeSafe automatically disconnects a remote management session of lower priority when another remote management session of higher priority starts. The priorities for the different types of remote management sessions are as follows.

1.Console port

2.Telnet

3.HTTP

14.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:

1.A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service.

2.You have disabled that service in one of the remote management screens.

Remote Management Screens 14-1