HomeSafe User’s Guide

 

Table 8-4 WAN ISP : PPTP Encapsulation

 

 

LABEL

DESCRIPTION

 

 

My IP Subnet Mask

Your HomeSafe will automatically calculate the subnet mask based on the IP

 

address that you assign. Unless you are implementing subnetting, use the

 

subnet mask computed by the HomeSafe.

 

 

Server IP Address

Type the IP address of the PPTP server.

 

 

Connection ID/Name

Type your identification name for the PPTP server.

 

 

Apply

Click Apply to save your changes back to the HomeSafe.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

8.5Configuring WAN IP

To change your HomeSafe’s WAN IP settings, click WAN, then the WAN IP tab. This screen varies according to the type of encapsulation you select.

If your ISP did not assign you a fixed IP address, click Get automatically from ISP (Default);otherwise click Use fixed IP Address and enter the IP address in the field provided.

 

Figure 8-5 WAN : IP

The following table describes the labels in this screen.

 

Table 8-5 WAN : IP

 

 

LABEL

DESCRIPTION

 

 

WAN IP Address Assignment

 

 

Get automatically

Select this option If your ISP did not assign you a fixed IP address. This is the

from ISP

default selection.

 

 

Use fixed IP

Select this option If the ISP assigned a fixed IP address.

address

 

8-6

WAN

Page 123
Image 123
ZyXEL Communications HS100/HS100W manual Configuring WAN IP, WAN IP Address Assignment