ZyXEL Communications HS100/HS100W manual All APs on the same subnet, Allow roaming

HomeSafe User’s Guide

		Figure 6-7 WLAN : Roaming
The following table describes the labels in this screen.
		Table 6-2 WLAN : Roaming
LABEL		DESCRIPTION
Active	Select Yes from the drop-down list box to enable roaming on the HomeSafe if you have
	two or more HomeSafes on the same subnet.
		) All APs on the same subnet and the
		wireless stations must have the same ESSID to
		allow roaming.
Port	Enter the port number to communicate roaming information between APs. The port
	number must be the same on all APs. The default is 3517. Make sure this port is not
	used by other services.
Apply	Click Apply to save your changes back to the HomeSafe.
Reset	Click Reset to reload the previous configuration for this screen.

Wireless Configuration and Roaming 6-7