ZyXEL Communications HS100/HS100W manual Changing the System Password, Menu 23 System Password

HomeSafe User’s Guide

		Table 17-2 Main Menu Summary
#	MENU TITLE		DESCRIPTION
14	Dial-in User Setup		Use this menu to set up local user profiles on the HomeSafe.
15	NAT Setup		Use this menu to specify inside servers when NAT is enabled.
21	Filter and Firewall Setup		Use this menu to configure filters, activate/deactivate the firewall and
			view the firewall log.
22	SNMP Configuration		Use this menu to set up SNMP related parameters.
23	System Security		Use this menu to change your password.
24	System Maintenance		This menu provides system status, diagnostics, software upload, etc.
26	Schedule Setup		Use this menu to schedule outgoing calls.
99	Exit		Use this to exit from SMT and return to a blank screen.

17.3 Changing the System Password

Change the HomeSafe default password by following the steps shown next.

Step 1. Enter 23 in the main menu to display Menu 23 - System Security as shown next.

Menu 23 - System Security

1.Change Password

2.RADIUS Server

4.IEEE802.1x

Step 1. Enter 23.1 in the main menu to display Menu 23.1 - System Security - Change Password.

Step 3. Type your existing system password in the Old Password field, for example “1234”, and press [ENTER].

Menu 23.1 - System Security - Change Password

Old Password= ?

New Password= ?

Retype to confirm= ?

Figure 17-4 Menu 23 System Password

Step 4. Type your new system password in the New Password field (up to 30 characters), and press [ENTER].

Step 5. Re-type your new system password in the Retype to confirm field for confirmation and press [ENTER].

Note that as you type a password, the screen displays an “*” for each character you type.

17-4 Introducing the SMT