ZyXEL Communications HS100/HS100W Log Commands, Configuring What You Want the HomeSafe to Log

HomeSafe User’s Guide

		Chart 5 ICMP Type and Code Explanations
TYPE	CODE	DESCRIPTION
	0	Time to live exceeded in transit
	1	Fragment reassembly time exceeded
12		Parameter Problem
	0	Pointer indicates the error
13		Timestamp
	0	Timestamp request message
14		Timestamp Reply
	0	Timestamp reply message
15		Information Request
	0	Information request message
16		Information Reply
	0	Information reply message

Log Commands

Go to the command interpreter interface (Chapter 32 explains how to access and use the commands).

Configuring What You Want the HomeSafe to Log

1.Use the sys logs load command to load the log setting buffer that allows you to configure which logs the HomeSafe is to record.

2.Use sys logs category to view a list of the log categories.

Displaying Log Categories Example

Copyright (c) 1994 - 2004 ZyXEL Communications Corp.

HS-100W> ?

Valid commands are:
sys	exit	device	ether
poe	pptp	config	wlan
ip	ppp	bridge	parentCtrl
radius	8021x
HS-100W>

3.Use sys logs category followed by a log category to display the parameters that are available for the category.

Displaying Log Parameters Example

HS-100W> sys logs category access

D-4 Log Descriptions