ZyXEL Communications HS100/HS100W manual Wpa-Psk

HomeSafe User’s Guide

		Figure 7-2 WLAN : Wireless : No Security
The following table describes the labels in this screen.
		Table 7-1 WLAN : Wireless : No Security
LABEL		DESCRIPTION
Security	Choose from one of the security features listed in the drop-down box.
	¾	No Security
	¾	Static WEP
	¾	WPA-PSK
	¾	WPA
	¾	802.1x + Dynamic WEP
	¾	802.1x + Static WEP
	¾	802.1x + No WEP
Preamble	Select a preamble type from the drop-down list menu. Choices are Long, Short and
	Dynamic. The default setting is Long.
	See the section on preamble for more information.
802.11 Mode	Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to associate
	with the HomeSafe.
	Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to associate
	with the HomeSafe.
	Select Mixed to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices to
	associate with the HomeSafe. The transmission rate of your HomeSafe might be
	reduced.
Max. Frame	Enable Maximum Frame Burst to help eliminate collisions in mixed-mode networks
Burst	(networks with both IEEE 802.11g and IEEE 802.11b traffic) and enhance the
	performance of both pure IEEE 802.11g and mixed IEEE 802.11b/g networks. Maximum
	Frame Burst sets the maximum time, in microseconds, that the HomeSafe transmits
	IEEE 802.11g wireless traffic only.
	Type the maximum frame burst between 0 and 1800 (650, 1000 or 1800
	recommended). Enter 0 to disable this feature. The default is 650.
Apply	Click Apply to save your changes back to the HomeSafe.

7-2 Wireless Security