ZyXEL Communications HS100/HS100W Back to Factory Defaults, Configuration Restore Successful

HomeSafe User’s Guide

Figure 16-11 Configuration : Restore Successful

The HomeSafe automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 16-12 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default HomeSafe IP address (192.168.1.1). See your Quick Start Guide for details on how to set up your computer’s IP address.

If the upload was not successful, the following screen will appear. Click Return to go back to the Configuration screen.

Figure 16-13 Configuration Restore Error

16.7.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and returns the HomeSafe to its factory defaults as shown on the screen. The following warning screen will appear.

16-8 Maintenance