ZyXEL Communications HS100/HS100W manual Configuring DNS, Remote Management DNS

	HomeSafe User’s Guide
	Table 14-5 Remote Management : SNMP
LABEL	DESCRIPTION
Service Access	Select the interface(s) through which a computer may access the HomeSafe using
	this service.
Secured Client	A secured client is a “trusted” computer that is allowed to communicate with the
IP Address	HomeSafe using this service.
	Select All to allow any computer to access the HomeSafe using this service.
	Choose Selected to just allow the computer with the IP address that you specify to
	access the HomeSafe using this service.
Apply	Click Apply to save your customized settings and exit this screen.
Reset	Click Reset to begin configuring this screen afresh.

14.7 Configuring DNS

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa. Refer to the chapter on Wizard Setup for background information.

To change your HomeSafe’s DNS settings, click REMOTE MGMT, then the DNS tab. The screen appears as shown.

		Figure 14-7 Remote Management : DNS
The following table describes the labels in this screen.
		Table 14-6 Remote Management : DNS
	LABEL	DESCRIPTION
	Server Port	The DNS service port number is 53 and cannot be changed here.
	Server Access	Select the interface(s) through which a computer may send DNS queries to the
		HomeSafe.
	Secured Client	A secured client is a “trusted” computer that is allowed to send DNS queries to the
	IP Address	HomeSafe.
		Select All to allow any computer to send DNS queries to the HomeSafe.
		Choose Selected to just allow the computer with the IP address that you specify to
		send DNS queries to the HomeSafe.
	Apply	Click Apply to save your customized settings and exit this screen.
	Reset	Click Reset to begin configuring this screen afresh.

Remote Management Screens 14-9