ZyXEL Communications HS100/HS100W manual Log Settings, Settings, see section

HomeSafe User’s Guide

	Table 15-1 View Logs
LABEL	DESCRIPTION
Destination	This field lists the destination IP address and the port number of the incoming packet.
Note	This field displays additional information about the log entry.
Email Log Now	Click Email Log Now to send the log screen to the e-mail address specified in the Log
	Settings page (make sure that you have first filled in the Address Info fields in Log
	Settings, see section 15.2).
Refresh	Click Refresh to renew the log screen.
Clear Log	Click Clear Log to delete all the logs.

15.2 Log Settings

You can configure the HomeSafe’s general log settings in one location.

Click the LOGS in the navigation panel and then the Log Settings tab to open the Log Settings screen.

Use the Log Settings screen to configure to where the HomeSafe is to send logs; the schedule for when the HomeSafe is to send the logs and which logs and/or immediate alerts the HomeSafe to send.

An alert is a type of log that warrants more serious attention. They include system errors, attacks (access control) and attempted access to blocked web sites or web sites with restricted web features such as cookies, active X and so on. Some categories such as System Errors consist of both logs and alerts. You may differentiate them by their color in the View Log screen. Alerts display in red and logs display in black.

Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full (see Log Schedule). Selecting many alert and/or log categories (especially Access Control) may result in many e-mails being sent

15-2 Logs