ZyXEL Communications HS100/HS100W manual Menu 3.5.2 Roaming Configuration

		HomeSafe User’s Guide
Menu 3.5 - Wireless LAN Setup
ESSID= ZyXEL
Hide ESSID=	No
Channel ID=	CH06 2437MHz	Edit MAC Address Filter= No
RTS Threshold= 2432		Edit Roaming Configuration= Yes
Frag. Threshold= 2432
WEP Encryption= Disable		Preamble= Long
Default Key= N/A		802.11 Mode= Mixed
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
	Press ENTER to Confirm or ESC to Cancel:

Figure 20-9 Menu 3.5 Wireless LAN Setup

Step 3. Move the cursor to the Edit Roaming Configuration field. Press [SPACE BAR] to select Yes and then press [ENTER]. Menu 3.5.2 – Roaming Configuration displays as shown next.

Menu 3.5.2 - Roaming Configuration

Active= Yes

Port #= 3517

Figure 20-10 Menu 3.5.2 Roaming Configuration

The following table describes the fields in this menu.

	Table 20-6 Menu 3.5.2 Roaming Configuration
FIELD	DESCRIPTION
Active	Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the HomeSafe if
	you have two or more HomeSafe’s on the same subnet.
Port #	Enter the port number to communicate roaming information between access points. The
	port number must be the same on all access points. The default is 3517. Make sure this port
	is not used by other services.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Menu 3 LAN Setup 20-9