ZyXEL Communications HS100/HS100W manual Appendix D Log Descriptions, Chart 1 System Error Logs

HomeSafe User’s Guide

Appendix D

Log Descriptions

Configure centralized logs using the embedded web configurator; see the online help for details. This appendix describes some of the log messages.

	Chart 1 System Error Logs
LOG MESSAGE	DESCRIPTION
%s exceeds the max.	This attempt to create a NAT session exceeds the maximum number of
number of session per	NAT session table entries allowed to be created per host.
host!

	Chart 2 System Maintenance Logs
LOG MESSAGE		DESCRIPTION
Time calibration is		The router has adjusted its time based on information from the time
successful		server.
Time calibration		The router failed to get information from the time server.
failed
DHCP client gets %s		A DHCP client got a new IP address from the DHCP server.
DHCP client IP		A DHCP client's IP address has expired.
expired
DHCP server assigns		The DHCP server assigned an IP address to a client.
SMT Login		Someone has logged on to the router's SMT interface.
Successfully
SMT Login Fail		Someone has failed to log on to the router's SMT interface.
WEB Login		Someone has logged on to the router's web configurator interface.
Successfully
WEB Login Fail		Someone has failed to log on to the router's web configurator interface.
TELNET Login		Someone has logged on to the router via telnet.
Successfully
TELNET Login Fail		Someone has failed to log on to the router via telnet.
FTP Login		Someone has logged on to the router via ftp.
Successfully
FTP Login Fail		Someone has failed to log on to the router via ftp.
NAT Session Table is		The maximum number of NAT session table entries has been
Full!		exceeded and the table is full.
!! Phase 1 ID type		The ID type of an incoming packet does not match the local's peer ID
mismatch		type.
!! Phase 1 ID content		The ID content of an incoming packet does not match the local's peer

Log Descriptions D-1