ZyXEL Communications HS100/HS100W manual Log and Trace, Console Port Speed, Syslog Logging

HomeSafe User’s Guide

30.2.2 Console Port Speed

You can set up different port speeds for the console port through Menu 24.2.2 – System Maintenance – Console Port Speed. Your HomeSafe supports 9600 (default), 19200, 38400, 57600 and 115200 bps. Press [SPACE BAR] and then [ENTER] to select the desired speed in menu 24.2.2, as shown in the following figure.

Menu 24.2.2 – System Maintenance – Change Console Port Speed

Console Port Speed: 9600

Press ENTER to Confirm or ESC to Cancel:

Figure 30-5 Menu 24.2.2 System Maintenance : Change Console Port Speed

30.3 Log and Trace

There are two logging facilities in the HomeSafe. The first is the error logs and trace records that are stored locally. The second is the syslog facility for message logging.

30.3.1 Syslog Logging

The HomeSafe uses the syslog facility to log the CDR (Call Detail Record) and system messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System Maintenance - Syslog Logging, as shown next.

Menu 24.3.2 - System Maintenance - Syslog Logging

Syslog:

Active= No

Syslog Server IP Address= 0.0.0.0

Log Facility= Local 1

Press ENTER to Confirm or ESC to Cancel:

Figure 30-6 Menu 24.3.2 System Maintenance : Syslog Logging

You need to configure the syslog parameters described in the following table to activate syslog then choose what you want to log.

Table 30-3 Menu 24.3.2 System Maintenance : Syslog and Accounting

PARAMETER	DESCRIPTION
Syslog:
Active	Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Syslog Server IP	Enter the IP Address of the server that will log the CDR (Call Detail Record) and
Address	system messages i.e., the syslog server.
Log Facility	Press [SPACE BAR] and then [ENTER] to select a Local option. The log facility
	allows you to log the message to different files in the server. Please refer to the
	documentation of your syslog program for more details.

When finished configuring this screen, press [ENTER] to confirm or [ESC] to cancel.

30-4 System Information and Diagnosis