ZyXEL Communications HS100/HS100W Firewall, Remote Mgmt Telnet, Ftp, Www, Snmp, Dns, Logs, Logout

			HomeSafe User’s Guide
			Table 2-17 Screens Summary
	LINK	TAB	FUNCTION
	PARENTAL	General	Use this screen to enable/disable parental control, configure idle
	CONTROL		timeout and group categories, register for content filtering service
			and edit user profiles.
		Bypass List	Use this screen to allow devices in your network access the Internet
			without using parental control.
	FIREWALL	Settings	Use this screen to activate/deactivate the firewall and log packets
			related to firewall rules.
		Filter	This screen allows you to block sites containing certain keywords in
			the URL and set the days and times for the HomeSafe to perform
			content filtering.
		Services	Use this screen to enable service blocking.
	REMOTE MGMT	TELNET	Use this screen to configure through which interface(s) and from
			which IP address(es) users can use Telnet to manage the
			HomeSafe.
		FTP	Use this screen to configure through which interface(s) and from
			which IP address(es) users can use FTP to access the HomeSafe.
		WWW	Use this screen to configure through which interface(s) and from
			which IP address(es) users can use HTTP to manage the
			HomeSafe.
		SNMP	Use this screen to configure your HomeSafe’s settings for Simple
			Network Management Protocol management.
		DNS	Use this screen to configure through which interface(s) and from
			which IP address(es) users can send DNS queries to the HomeSafe.
		Security	Use this screen to change your anti-probing settings.
	UPnP	UPnP	Use this screen to enable UPnP on the HomeSafe.
	LOGS	View Log	Use this screen to view the logs for the categories that you selected.
		Log Settings	Use this screen to change your HomeSafe’s log settings.
MAINTENANCE		Status	This screen contains administrative and system-related information.
		DHCP Table	This screen displays DHCP (Dynamic Host Configuration Protocol)
			related information and is READ-ONLY.
		Any IP	Use this screen to allow a computer to access the Internet without
			changing the network settings of the computer, when the IP
			addresses of the computer and the HomeSafe are not in the same
			subnet.
		F/W Upload	Use this screen to upload firmware to your HomeSafe.
		Configuration	Use this screen to backup and restore the configuration or reset the
			factory defaults to your HomeSafe.
		Restart	This screen allows you to reboot the HomeSafe without turning the
			power off.
LOGOUT			Click this label to exit the web configurator.

Introducing the Web Configurator 2-23