ZyXEL Communications HS100/HS100W Only one LAN computer can use a trigger port range at a time

HomeSafe User’s Guide

)Only one LAN computer can use a trigger port (range) at a time.

		Figure 9-8 Trigger Port
The following table describes the labels in this screen.
		Table 9-7 Trigger Port
	LABEL	DESCRIPTION
	#	This is the rule index number (read-only).
	Name	Type a unique name (up to 15 characters) for identification purposes. All characters are
		permitted - including spaces.
	Incoming	Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out
		a particular service. The HomeSafe forwards the traffic with this port (or range of ports)
		to the client computer on the LAN that requested the service.
	Start Port	Type a port number or the starting port number in a range of port numbers.
	End Port	Type a port number or the ending port number in a range of port numbers.
	Trigger	The trigger port is a port (or a range of ports) that causes (or triggers) the HomeSafe to
		record the IP address of the LAN computer that sent the traffic to a server on the WAN.
	Start Port	Type a port number or the starting port number in a range of port numbers.
	End Port	Type a port number or the ending port number in a range of port numbers.
	Apply	Click Apply to save your changes back to the HomeSafe.
	Reset	Click Reset to begin configuring this screen afresh.

NAT Screens 9-11