ZyXEL Communications HS100/HS100W manual Chapter Remote Management

HomeSafe User’s Guide

Chapter 33

Remote Management

This chapter covers remote management (SMT menu 24.11).

33.1 Remote Management

Remote management allows you to determine which services/protocols can access which HomeSafe interface (if any) from which computers.

You may manage your HomeSafe from a remote location via:

¾	Internet (WAN	¾	ALL (LAN and WAN)
	only)
¾	LAN only	¾	Neither (Disable).

)When you Choose WAN only or ALL (LAN & WAN), you still need to configure a firewall rule to allow access.

To disable remote management of a service, select Disable in the corresponding Server Access field.

Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.

	Menu 24.11 - Remote Management Control
TELNET Server:	Port =	23	Access = LAN only
	Secure	Client IP = 0.0.0.0
FTP Server:	Port =	21	Access = LAN only
	Secure	Client IP = 0.0.0.0
Web Server:	Port =	80	Access = LAN only
	Secure	Client IP = 0.0.0.0
SNMP Service:	Port =	161	Access = LAN only
	Secure	Client IP = 0.0.0.0
DNS Service:	Port =	53	Access = LAN only
	Secure	Client IP = 0.0.0.0

Figure 33-1 Menu 24.11 – Remote Management Control

The following table describes the fields in this screen.

Table 33-1 Menu 24.11 – Remote Management Control

FIELD

DESCRIPTION

EXAMPLE

Telnet Server

FTP Server

Web Server

SNMP Service

DNS Service

Each of these read-only labels denotes a service or protocol.

Remote Management 33-1