ZyXEL Communications HS100/HS100W manual Configuring FTP, Remote Management Telnet

HomeSafe User’s Guide

		Figure 14-3 Remote Management : Telnet
The following table describes the labels in this screen.
		Table 14-2 Remote Management : Telnet
	LABEL	DESCRIPTION
	Server Port	You may change the server port number for a service if needed, however you must
		use the same port number in order to use that service for remote management.
	Server Access	Select the interface(s) through which a computer may access the HomeSafe using
		this service.
	Secured Client	A secured client is a “trusted” computer that is allowed to communicate with the
	IP Address	HomeSafe using this service.
		Select All to allow any computer to access the HomeSafe using this service.
		Choose Selected to just allow the computer with the IP address that you specify to
		access the HomeSafe using this service.
	Apply	Click Apply to save your customized settings and exit this screen.
	Reset	Click Reset to begin configuring this screen afresh.

14.5 Configuring FTP

You can upload and download the HomeSafe’s firmware and configuration files using FTP, please see the chapter on firmware and configuration file maintenance for details. To use this feature, your computer must have an FTP client.

To change your HomeSafe’s FTP settings, click REMOTE MGMT, then the FTP tab. The screen appears as shown.

14-4 Remote Management Screens