ZyXEL Communications HS100/HS100W manual Address Mapping, One-to-One and Server mapping types

HomeSafe User’s Guide

set summary screen, the new rule will be rule 7, not 9. Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new rules 4, 5 and 6.

To change your HomeSafe’s Address Mapping settings, click SUA/NAT, then the Address Mapping tab. The screen appears as shown.

		Figure 9-5 Address Mapping
The following table describes the labels in this screen.
		Table 9-5 Address Mapping
	LABEL	DESCRIPTION
	Local Start IP	This refers to the Inside Local Address (ILA), which is the starting local IP address. If
		the rule is for all local IP addresses, then this field displays 0.0.0.0 as the Local Start
		IP address. Local IP addresses are N/A for Server port mapping.
	Local End IP	This is the end Inside Local Address (ILA). If the rule is for all local IP addresses, then
		this field displays 255.255.255.255 as the Local End IP address. This field is N/A for
		One-to-One and Server mapping types.
	Global Start IP	This refers to the Inside Global IP Address (IGA). 0.0.0.0 is for a dynamic IP address
		from your ISP with Many-to-Oneand Server mapping types.
	Global End IP	This is the end Inside Global Address (IGA).
		This field is N/A for One-to-One, Many-to-Oneand Server mapping types.
	Type	1. One-to-Onemode maps one local IP address to one global IP address. Note that
		port numbers do not change for the One-to-one NAT mapping type.
		2. Many-to-Onemode maps multiple local IP addresses to one global IP address. This
		is equivalent to SUA (i.e., PAT, port address translation), ZyXEL's Single User Account
		feature that previous ZyXEL routers supported only.
		3. Many-to-Many Overload mode maps multiple local IP addresses to shared global IP
		addresses.
		4. Many One-to-Onemode maps each local IP address to unique global IP addresses.
		5. Server allows you to specify inside servers of different services behind the NAT to
		be accessible to the outside world.
	Insert	Click Insert to insert a new mapping rule before an existing one.
	Edit	Click Edit to go to the Address Mapping Rule screen.
	Delete	Click Delete to delete an address mapping rule.

9-8 NAT Screens