ZyXEL Communications HS100/HS100W manual Chapter Maintenance, Maintenance Overview, Status Screen

HomeSafe User’s Guide

Chapter 16

Maintenance

This chapter displays system information such as ZyNOS firmware, port IP addresses and port traffic statistics.

16.1 Maintenance Overview

The maintenance screens can help you view system information, upload new firmware, manage configuration and restart your HomeSafe.

16.2 Status Screen

Click MAINTENANCE to open the Status screen, which you can use to monitor your HomeSafe. Note that these fields are READ-ONLY and only for diagnostic purposes.

	Figure 16-1 Maintenance : Status
The following table describes the labels in this screen.
	Table 16-1 Maintenance : Status
LABEL	DESCRIPTION
System Name	This is the System Name you chose in the first Internet Access Wizard screen. It is
	for identification purposes
Model Name	The model name identifies your device type. The model name should also be on a
	sticker on your HomeSafe. If you are uploading firmware, be sure to upload
	firmware for this exact model name. This field is not available on all models.
ZyNOS Firmware	This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's
Version	proprietary Network Operating System design.
Routing Protocols	This shows the routing protocol - IP for which the HomeSafe is configured. This field
	is not configurable in all HomeSafe router models.
WAN Port
IP Address	This is the WAN port IP address.

Maintenance 16-1