ZyXEL Communications HS100/HS100W manual Configuring WAN ISP, Ethernet Encapsulation

HomeSafe User’s Guide

	Table 8-1 WAN : Route
LABEL	DESCRIPTION
WAN	The default WAN connection is "1' as your broadband connection via the WAN port
	should always be your preferred method of accessing the WAN. The default priority of
Traffic	the routes is WAN and then Traffic Redirect.
Redirect
Apply	Click Apply to save your changes back to the HomeSafe.
Reset	Click Reset to begin configuring this screen afresh.

8.4Configuring WAN ISP

To change your HomeSafe’s WAN ISP settings, click WAN, then the WAN ISP tab. The screen differs by the encapsulation.

8.4.1 Ethernet Encapsulation

The screen shown next is for Ethernet encapsulation.

		Figure 8-2 WAN ISP : Ethernet Encapsulation
The following table describes the labels in this screen.
		Table 8-2 WAN ISP : Ethernet Encapsulation
	LABEL	DESCRIPTION
	Encapsulation	You must choose the Ethernet option when the WAN port is used as a regular
		Ethernet.
	Service Type	Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR-
		Manager (Roadrunner Manager authentication method), RR-Toshiba(Roadrunner
		Toshiba authentication method) or Telia Login.
		The following fields do not appear with the Standard service type.
	User Name	Type the user name given to you by your ISP.
	Password	Type the password associated with the user name above.
	Retype to Confirm	Type the password again to make sure that you have entered it correctly.
	Login Server IP	Type the authentication server IP address here if your ISP gave you one.
	Address

8-2 WAN