ZyXEL Communications HS100/HS100W Edit IP, Menu 11.1 Remote Node Profile for Pptp Encapsulation

HomeSafe User’s Guide

Table 22-3 Menu 11.1 Remote Node Profile for PPTP Encapsulation

FIELD	DESCRIPTION	EXAMPLE
Encapsulation	Press [SPACE BAR] and then [ENTER] to select PPTP. You must	PPTP
	also go to menu 11.3 to check the IP Address setting once you have
	selected the encapsulation method.
My IP Addr	Enter the IP address of the WAN Ethernet port.	10.0.0.140
My IP Mask	Enter the subnet mask of the WAN Ethernet port.	255.255.255.0
Server IP Addr	Enter the IP address of the ANT modem.	10.0.0.138
Connection	Enter the connection ID or connection name in the ANT. It must	N:My ISP
ID/Name	follow the “c:id” and “n:name” format.
	This field is optional and depends on the requirements of your DSL
	modem.

22.3 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.3 - Remote Node Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= SUA Only

Metric= 1

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Figure 22-4 Menu 11.3 Remote Node Network Layer Options for Ethernet Encapsulation

This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP Addr field for Ethernet encapsulation. The following table describes the fields in this menu.

Table 22-4 Remote Node Network Layer Options

FIELD	DESCRIPTION	EXAMPLE
IP Address	If your ISP did not assign you an explicit IP address, press [SPACE BAR]	Dynamic
Assignment	and then [ENTER] to select Dynamic; otherwise select Static and enter	(default)
	the IP address & subnet mask in the following fields.
(Rem) IP	If you have a static IP Assignment, enter the IP address assigned to you
Address	by your ISP.
(Rem) IP	If you have a static IP Assignment, enter the subnet mask assigned to
Subnet Mask	you.
Gateway IP	This field is applicable to Ethernet encapsulation only. Enter the gateway
Addr	IP address assigned to you if you are using a static IP address.

Remote Node Configuration 22-5