ZyXEL Communications HS100/HS100W manual Configuring a Filter Set

HomeSafe User’s Guide

27.2 Configuring a Filter Set

The HomeSafe includes filtering for NetBIOS over TCP/IP packets by default. To configure another filter set, follow the procedure below.

Step 1. Enter 21 in the main menu to open menu 21.

Menu 21 - Filter and Firewall Setup

1.Filter Setup

2.Firewall Setup

Enter Menu Selection Number:

Figure 27-4 Menu 21: Filter and Firewall Setup

Step 2. Enter 1 to bring up the following menu.

	Menu 21.1 - Filter Set Configuration
Filter		Filter
Set #	Comments	Set #	Comments
------	-----------------	------	-----------------
1	_______________	7	_______________
2	_______________	8	_______________
3	_______________	9	_______________
4	_______________	10	_______________
5	_______________	11	_______________
6	_______________	12	_______________

Enter Filter Set Number to Configure= 0

Edit Comments= N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 27-5 Menu 21.1: Filter Set Configuration Step 3. Select the filter set you wish to configure (1-12) and press [ENTER].

Step 4. Enter a descriptive name or comment in the Edit Comments field and press [ENTER].

Step 5. Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.1 - Filter Rules Summary.

This screen shows the summary of the existing rules in the filter set. The following tables contain a brief description of the abbreviations used in the previous menus.

Table 27-1 Abbreviations Used in the Filter Rules Summary Menu

FIELD DESCRIPTION

#The filter rule number: 1 to 6.

A	Active: “Y” means the rule is active. “N” means the rule is inactive.
Type	The type of filter rule: “GEN” for Generic, “IP” for TCP/IP.
Filter	These parameters are displayed here.
Rules

Filter Configuration 27-3