ZyXEL Communications HS100/HS100W manual Ethernet, Alias, Layer Options

HomeSafe User’s Guide

Table 22-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation

FIELD	DESCRIPTION	EXAMPLE
Rem Node Name	Enter a descriptive name for the remote node. This field can be up to	LAoffice
	eight characters.
Active	Press [SPACE BAR] and then [ENTER] to select Yes (activate remote	Yes
	node) or No (deactivate remote node).
Encapsulation	Ethernet is the default encapsulation. Press [SPACE BAR] and then	Ethernet
	[ENTER] to change to PPPoE or PPTP encapsulation.
Service Type	Press [SPACE BAR] and then [ENTER] to select from Standard, RR-	Standard
	Toshiba (RoadRunner Toshiba authentication method), RR-Manager
	(RoadRunner Manager authentication method), RR-Telstraor Telia
	Login. Choose one of the RoadRunner methods if your ISP is Time
	Warner's RoadRunner; otherwise choose Standard.
Outgoing
My Login	This field is applicable for PPPoE encapsulation only. Enter the login	jim
	name assigned by your ISP when the HomeSafe calls this remote
	node. Some ISPs append this field to the Service Name field above
	(e.g., jim@poellc) to access the PPPoE server.
My Password	Enter the password assigned by your ISP when the HomeSafe calls	*****
	this remote node. Valid for PPPoE encapsulation only.
Retype to	Type your password again to make sure that you have entered it	*****
Confirm	correctly.
Server	This field is valid only when RoadRunner is selected in the Service
	Type field. The HomeSafe will find the RoadRunner Server IP
	automatically if this field is left blank. If it does not, then you must enter
	the authentication server IP address here.
Relogin Every	This field is available when you select Telia Login in the Service Type
(min)	field.
	The Telia server logs the HomeSafe out if the HomeSafe does not log
	in periodically. Type the number of minutes from 1 to 59 (30
	recommended) for the HomeSafe to wait between logins.
Route IP	This field refers to the protocol that will be routed by your HomeSafe –	IP
	IP is the only option for the HomeSafe.
Apply Alias	Press [SPACE BAR] to choose Alias 1 or Alias 2.	Alias 1
	IP Alias allows you to partition a physical network into different logical
	networks over the same Ethernet interface. The HomeSafe supports
	three logical LAN interfaces via its single physical Ethernet interface
	with the HomeSafe itself as the gateway for each LAN network.
Edit IP	This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes	No
	and press [ENTER] to go to Menu 11.3 - Remote Node Network	(default)
	Layer Options.
Session Options
Edit Filter Sets	This field leads to another “hidden” menu. Use [SPACE BAR] to select	No
	Yes and press [ENTER] to open menu 11.5 to edit the filter sets. See	(default)
	the Remote Node Filter section for more details.
Edit Traffic	Press [SPACE BAR] to select Yes or No.
Redirect	Select Yes and press [ENTER] to configure Menu 11.6 Traffic
	Redirect Setup. Select No (default) if you do not want to configure this
	feature.

22-2 Remote Node Configuration