ZyXEL Communications HS100/HS100W manual Supported MIBs, Snmp Traps, Configuring Snmp

HomeSafe User’s Guide

14.6.1 Supported MIBs

The HomeSafe supports MIB II that is defined in RFC-1213 and RFC-1215. The focus of the MIBs is to let administrators collect statistical data and monitor status and performance.

14.6.2 SNMP Traps

The HomeSafe will send traps to the SNMP manager when any one of the following events occurs:

Table 14-4 SNMP Traps

TRAP #	TRAP NAME	DESCRIPTION
0	coldStart (defined in RFC-1215)	A trap is sent after booting (power on).
1	warmStart (defined in RFC-1215)	A trap is sent after booting (software reboot).
4	authenticationFailure (defined in	A trap is sent to the manager when receiving any SNMP
	RFC-1215)	get or set requirements with the wrong community
		(password).
6	whyReboot (defined in ZYXEL-	A trap is sent with the reason of restart before rebooting
	MIB)	when the system is going to restart (warm start).
6a	For intentional reboot :	A trap is sent with the message "System reboot by user!"
		if reboot is done intentionally, (for example, download new
		files, CI command "sys reboot", etc.).
6b	For fatal error :	A trap is sent with the message of the fatal code if the
		system reboots because of fatal errors.

14.6.3 Configuring SNMP

To change your HomeSafe’s SNMP settings, click REMOTE MGMT, then the SNMP tab. The screen appears as shown.

Remote Management Screens 14-7