HomeSafe User’s Guide

 

 

Table 3-9 Connection Wizard : WAN Setup

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

First DNS Server

Select From ISP if your ISP dynamically assigns DNS server information (and

 

 

 

the HomeSafe's WAN IP address). The field to the right displays the (read-

 

 

Second DNS Server

only) DNS server IP address that the ISP assigns.

 

 

Select User-Definedif you have the IP address of a DNS server. Enter the

 

 

 

 

 

Third DNS Server

DNS server's IP address in the field to the right.

 

 

Select None if you do not want to configure DNS servers. If you do not

 

 

 

 

 

 

configure a system DNS server, you must use IP addresses when configuring

 

 

 

VPN, DDNS and the time server.

 

 

 

 

 

 

WAN MAC Address

The MAC address field allows you to configure the WAN port's MAC Address

 

 

 

by either using the factory default or cloning the MAC address from a

 

 

 

computer on your LAN.

 

 

 

 

 

 

Factory Default

Select this option to use the factory assigned default MAC Address.

 

 

 

 

 

 

Spoof this Computer's

Select this option and enter the IP address of the computer on the LAN whose

 

 

MAC address - IP

MAC you are cloning. Once it is successfully configured, the address will be

 

 

Address

copied to the rom file (ZyNOS configuration file). It will not change unless you

 

 

 

change the setting or upload a different rom file.

 

 

 

 

 

 

Back

Click Back to return to the previous screen.

 

 

 

 

 

 

Next

Click Next to continue.

 

 

 

 

 

3.7Basic Setup Complete

Click Back to return to the previous screen or click Finish to complete and save the wizard setup.

Figure 3-9 Connection Wizard Finish

Connection Wizard

3-11

Page 67 Page 69
Page 68
Image 68
ZyXEL Communications HS100/HS100W manual Basic Setup Complete, Connection Wizard Finish
Page 67 Page 69
Top Page Image Contents