ZyXEL Communications HS100/HS100W manual Chapter Static Route Setup, IP Static Route Setup

HomeSafe User’s Guide

Chapter 23

Static Route Setup

This chapter shows how to setup IP static routes.

23.1 IP Static Route Setup

Step 1. To configure an IP static route, use Menu 12 – Static Routing Setup (shown next).

Menu 12 - IP Static Route Setup

1.________

2.________

3.________

4.________

5.________

6.________

7.________

8.________

Enter selection number:

Figure 23-1 Menu 12 IP Static Route Setup

Step 2. Now, type the route number of a static route you want to configure.

Menu 12.1 - Edit IP Static Route

Route #: 1

Route Name= ?

Active= No

Destination IP Address= ?

IP Subnet Mask= ?

Gateway IP Address= ?

Metric= 2

Private= No

Figure 23-2 Menu12.1 Edit IP Static Route

The following table describes the fields for Menu 12.1 – Edit IP Static Route Setup.

	Table 23-1 Menu12.1 Edit IP Static Route
FIELD	DESCRIPTION
Route #	This is the index number of the static route that you chose in menu 12.1.
Route Name	Type a descriptive name for this route. This is for identification purpose only.
Active	This field allows you to activate/deactivate this static route.
Destination IP	This parameter specifies the IP network address of the final destination. Routing
Address	is always based on network number. If you need to specify a route to a single
	host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the
	network number to be identical to the host ID.

Static Route Setup 23-1