HomeSafe User’s Guide

Menu 24.4 - System Maintenance - Diagnostic

TCP/IP

1.Ping Host

2.WAN DHCP Release

3.WAN DHCP Renewal

4.Internet Setup Test

System

11. Reboot System

Enter Menu Selection Number:

Figure 30-8 Menu 24.4 System Maintenance : Diagnostic

30.4.1 WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in Figure 30-9. LAN DHCP has already been discussed. The HomeSafe can act either as a WAN DHCP client (IP Address Assignment field in menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet) or None, (when you have a static IP). The WAN Release and Renewal fields in menu 24.4 conveniently allow you to release and/or renew the assigned WAN IP address, subnet mask and default gateway in a fashion similar to winipcfg.

Figure 30-9 LAN & WAN DHCP

The following table describes the diagnostic tests available in menu 24.4 for your HomeSafe and associated connections.

 

Table 30-4 System Maintenance Menu Diagnostic

 

 

FIELD

DESCRIPTION

 

 

Ping Host

Enter 1 to ping any machine (with an IP address) on your LAN or WAN. Enter

 

its IP address in the Host IP Address field below.

WAN DHCP Release

Enter 2 to release your WAN DHCP settings.

 

 

WAN DHCP Renewal

Enter 3 to renew your WAN DHCP settings.

 

 

Internet Setup Test

Enter 4 to test the Internet setup. You can also test the Internet setup in Menu

 

4 - Internet Access. Please refer to the Internet Access chapter for more

 

details. This feature is only available for dial-up connections using PPPoE or

 

PPTP encapsulation.

 

 

System Information and Diagnosis

30-7

Page 292
Image 292
ZyXEL Communications HS100/HS100W manual WAN Dhcp, System Maintenance Menu Diagnostic