ZyXEL Communications HS100/HS100W manual Checking/Modifying Your Computer’s IP Address

Your computer can now communicate with the HomeSafeusing the LAN port.

Select your network adapter. You should see your computer's (static) IP address, subnet mask and default gateway in this screen. Verify that your computer’s static IP address is in the correct subnet (192.168.1.2 to 192.168.1.254 if using the default HomeSafeLAN IP address). Alternatively, to have the HomeSafeassign your computer a new IP address (from the IP pool), make sure your HomeSafeis turned on and click Renew in this screen.

HomeSafe User’s Guide

-If you do not know your gateway’s IP address, remove previously installed gateways.

-If you have a gateway IP address, type it in the New gateway field and click Add.

4.Click OK to save and close the TCP/IP Properties window.

5.Click OK to close the Network window. Insert the Windows CD if prompted.

6.Turn on your HomeSafeand restart your computer when prompted.

Checking/Modifying Your Computer’s IP Address

1.Click Start and then Run.

2.In the Run window, type "winipcfg" and then click OK to open the IP Configuration window.

Setting up Your Computer’s IP Address E-3