HomeSafe User’s Guide

Chapter 18

Menu 1 General Setup

Menu 1 - General Setup contains administrative and system-related information.

18.1 General Setup

Menu 1 — General Setup contains administrative and system-related information (shown next). The System Name field is for identification purposes. However, because some ISPs check this name you should enter your computer's "Computer Name".

In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification tab, note the entry for the Computer name field and enter it as the HomeSafe System Name.

In Windows 2000 click Start, Settings, Control Panel and then double-click System. Click the Network Identification tab and then the Properties button. Note the entry for the Computer name field and enter it as the HomeSafe System Name.

In Windows XP, click start, My Computer, View system information and then click the Computer Name tab. Note the entry in the Full computer name field and enter it as the HomeSafe System Name.

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host name (System Name) on each individual computer, the domain name can be assigned from the HomeSafe via DHCP.

18.2 Procedure To Configure Menu 1

Step 1. Enter 1 in the Main Menu to open Menu 1 General Setup (shown next).

Menu 1 - General Setup

System Name= HS-100W

Domain Name= zyxel.com.tw

First System DNS Server= From ISP

IP Address= N/A

Second System DNS Server= From ISP

IP Address= N/A

Third System DNS Server= From ISP

IP Address= N/A

Edit Dynamic DNS= No

Figure 18-1 Menu 1 General Setup

Step 2. Fill in the required fields. Refer to the table shown next for more information about these fields.

Table 18-1 Menu 1 General Setup

FIELD

DESCRIPTION

EXAMPLE

 

 

 

System Name

Choose a descriptive name for identification purposes. It is

 

 

recommended you enter your computer’s “Computer name” in this

 

 

field. This name can be up to 30 alphanumeric characters long.

 

 

Spaces are not allowed, but dashes “-” and underscores "_" are

 

 

accepted.

 

 

 

 

Menu 1 General Setup

18-1

Page 216
Image 216
ZyXEL Communications HS100/HS100W Chapter Menu 1 General Setup, Procedure To Configure Menu, Field Description Example